10 Ways To Build Your Ghost Immobiliser Problems Empire

Protect Your Pride And Joy With The Ghost Immobiliser

Protect your pride & joy against theft by using the Ghost Immobiliser. This system is discreet & does not require additional key fobs to operate.

The device utilizes buttons on your vehicle (steering wheel doors, door panels and centre console) to create a unique, changeable pin code sequence up to 20 presses. This will then allow your vehicle to begin.

Simple PIN Code Change Process

With the growing rate of vehicle thefts, many owners are looking to improve their security. There are many different types of security products that are available for sale that range from tracking systems to alarms and immobilisers. However they do not all are equally effective in protecting your car. A tracking system may assist you in locating your car if it is stolen however it cannot prevent the crime. Immobilisers, on the contrary, does exactly what it says on the tin: it disables the engine of your car so that it cannot be started. The Autowatch Ghost immobiliser is one of the most advanced options on the market, making it almost impossible for thieves to steal your vehicle.

The ghost device utilizes the buttons on your car to generate an unique sequence that needs to be entered in order for the engine to begin. This can be done using the indicator stalk, window or heater buttons. In addition option, there is an app on mobile that acts as an emergency PIN code override, allowing the driver to operate the car without having to use the button sequence. This is especially useful if you need to give your car away for valet parking or maintenance, as the immobiliser will still be active and not deactivated.

The Ghost is an innovative and unique device that works with the buttons of your vehicle instead of as a separate unit. This means that it's not only a highly effective security measure against theft from your vehicle but can also be transferred over to any future cars you own, making it much more of an investment than a traditional steering wheel lock.

Small device that is weatherproof

The Autowatch Ghost Immobiliser is a sophisticated security system that protects your vehicle from key hacking and cloning. It also blocks ECU swapping. It's a small weatherproof device that connects with the ECU of your vehicle directly over the CAN bus to stop the motor. It can be installed in the vehicle without wiring and has been thoroughly tested to ensure compatibility with all vehicles. It is also immune to jamming devices, which are a common technique that car thieves use to circumvent immobilisers.

The advantage of CAN data over traditional systems is that they work silently. It can't be detected by sophisticated RF scanning or code-grabbing technologies and is also undetectable by conventional diagnostic tools. The Autowatch Ghost does not use LED indicators, but instead uses buttons on your vehicle, like the steering wheel, the centre console, or door panels, to create unique sequences for disarming. You can create a sequence that is as long as 20 presses to increase security. The iPhone app is limited to one connection, with an individual pairing code for the Ghost. All communication between the two devices is protected.

The Ghost stops car thieves from adding a new ignition key or replacing the ECU in order to bypass the immobiliser. It will only allow the engine to run only if the correct pin code is entered. It can also be put into valet/service mode for a temporary operation (with defined parameters like a 30mph speed limit) so that you can give your car to a valet service for maintenance without having to enter a pin code.

Tested for each vehicle

The Autowatch Ghost is a first-of-its-kind aftermarket CANbus immobiliser.  ghost immobiliser  can be connected to the wiring of your vehicle and to the engine control unit (ECU). The device intercepts electronic signals to disable your car's system from running its normal start-up routine until you input a custom passcode. The system can be turned on and off using your own smartphone app without the need for wires.

The factory-installed immobilisers function with a transponder which is integrated into the key. It transmits a message to the ECU. If the correct code is sent the car will start however if the transponder is swapped with one from another vehicle the immobiliser won't recognize it. This enables the vehicle to be stolen and started. A South African company that is at the forefront of car security systems technology created the Ghost immobiliser. It guards you against key cloning or hacking, and even key theft. The only way thieves could steal your car is by physically towing it away, and even then they wouldn't be allowed to drive it.

Ghost makes use of the buttons on your car, such as the indicator stalk, steering wheel and door panels to create a unique PIN sequence that can be changed that must be entered prior to you are able to use your car. It does this without additional hardware, like key fobs. It can take up to 20 presses. It is also undetectable to diagnostic equipment and does not transmit radio frequency signals so thieves cannot make use of sophisticated RF scanning or code-grabbing technology to discover that security systems have been installed.

Unlike physical anti-theft devices like clamps or wheel locks, Ghost is hidden within the vehicle, so it cannot be taken away or disabled by thieves. It is even more difficult to get rid of than a car alarm, which requires disarming using a button sequence. This makes it an excellent addition to an GPS tracking device, which can be used to locate your vehicle after it's been stolen.

Emergency PIN code override

You don't need to look too far on social media to find stories or even videos of vehicles that have been taken by car thieves using the most advanced technology tools available to them. This includes key-cloning and hacking devices that allow them to start your vehicle without the original key fobs.

The Ghost immobiliser was designed to combat this, and give you an additional layer of security to keep your vehicle from being targeted by thieves. It creates an individual pin code push sequence using your buttons on the steering wheel, door panel, and centre console. This unique PIN is entered in conjunction with your original key fob in order to prevent the engine from getting started. The unique override pin is found on a black card that you will receive after the installation. It is simple to remember since there aren't any LED indicators.

The device is hidden within the wiring of the vehicle and doesn't emit radio signals. This means it can't be detected by diagnostic software that can tell what type of security systems you have installed. This makes it a fantastic alternative to an alarm.

In contrast to other security systems that rely on a relay located in the engine bays, these immobilisers CANBUS communicate through CAN databus (brand dependent) with the ECU and BCM of the vehicle. This allows them to shut down a vehicle completely by sending a digital block to the ECU and engine.

They can also be linked to a separate analogue alarm immobiliser, tracker or alarm. This should be specified prior to installation. They are also service/valet-mode compatible and a great alternative to a tracker when you are taking your car in for repair at the dealer.

Service/Valet Mode

In recent times, there has seen an increase in the number of cars being stolen without the owners keys. With easy access to key cloning equipment & door lock pick sets, it is now much easier for thieves to take your pride and joy. To combat this we are now offering the Autowatch Ghost immobiliser that prevents your vehicle from being driven even if your keys have been cloned or your car has been stolen.

It communicates directly to your cars ECU (Engine Control Unit) through the CAN data circuit. It's completely silent since it doesn't utilize radio frequencies or key fobs. This means it isn't detected by diagnostics or any other car hacking devices. It also protects you from adding an ECU or key to bypass the system because only the PIN number allows the engine to start.

The device is concealed inside your car using existing buttons on the steering wheel, the centre console and door panels. Before you can start your car, you need to enter a unique and changeable PIN code up to 20 digits.

This is the first aftermarket immobiliser CAN bus that has been created that will stop your car being started or driven away without a PIN code being entered first. If you are driving away with the device in motion it will display an indicator on your dashboard which will flash continuously for approximately 300m. Entering your PIN code will deactivate the anti-hijack. Your vehicle will continue to operate normally. If you do not enter your PIN code at this time the indication will continue to flash and require a new PIN code for every attempt to start your car.